The most popular screen printing machine in China

2022-07-31
  • Detail

China's silk printing machine market has great potential and deserves attention.

the import and export of China's printing machinery and equipment has shown a trend of rapid growth. However, among the various printing equipment imported over the years, sheet fed printing machines and web printing machines account for almost 50% of the import volume, attracting the close attention of many experts. However, the import of silk screen printing machines with various printing methods is generally ignored. One of the reasons is that the manufacturing enterprises of silk printing press are generally small in scale, and the value of products seems to be relatively low, which is easy to be ignored compared with offset press and gravure press. Another reason is that the production scale of silk printing equipment manufacturing enterprises is small, which has not attracted the attention of large enterprise groups, and the investment is obviously insufficient. In fact, the import of screen printing brush machine is also a considerable potential market, and enterprises with conditions should pay attention to it

the export situation of China's silk printing equipment is good. The export volume in 2004 increased by 110.7% compared with that in 2003. It is one of the equipment varieties with the fastest growth in the export of printing equipment. However, compared with other printing equipment with large export volume, the total export volume is still small, accounting for only 4.3% of the total export volume of printing equipment

export of silk screen printing machines

the export volume of silk screen printing equipment showed a rapid growth trend. In 2004, 185 circular printing presses were exported, with an export volume of 3.1775 million US dollars. The main countries and regions exported were Hong Kong, Taiwan, China, Thailand and the Netherlands, of which more than 35% were re exported from Hong Kong, China. 544 flat printing presses were exported, with an export value of US $2.9431 million. The main countries and regions exported were Germany, Hong Kong, Taiwan, China and India, of which Germany and Hong Kong accounted for more than 58% of the export value. 463 other printing presses were exported, with an export value of 3056600 US dollars. The main countries and regions exported were Hong Kong, China, Thailand, Malaysia and the United States, of which Hong Kong, China accounted for 37.1% of the export value

import of screen printing brush machine

the import of screen printing brush machine still shows an increasing trend, but some varieties are declining. In 2004, 168 circular printing presses were imported, with an import value of US $17.8943 million. The main importing countries and regions are Austria, Germany, Japan and Taiwan, China, of which Austria and Germany account for 59.7% of the total import. 1874 flat printing presses were imported, with an import value of 95.4678 million US dollars. The main countries and regions imported were Taiwan, China, Japan, South Korea and Germany. Among them, the test piece of China's Taiwan was vertically inserted between the cylinder and the pressure roller axis, accounting for 46.7%. 971 sets of other printing presses were imported, with an import value of US $42.3061 million. The main importing countries and regions were Japan, Taiwan, China, Germany and the United States, of which Japan and Taiwan, China accounted for 46.9% of the import value. Expand exports and strive to achieve a balance between import and export. In 2004, as the only provincial "urban mineral" demonstration base in our city, the import value of China's printing machinery was US $1.716 billion, and the export value was US $262million. The ratio of import to export was 6.55:1. The import value of silk screen printing brush machine is 155.67 million US dollars, and the export value is 111.8 million US dollars. The ratio of import to export is 13. Direct contact with the plate 93:1. The imbalance of import and export trade is more than twice that of the total import and export of printing machinery. Its export contribution rate is one of the poor products in China, which should be paid attention to by all aspects of the industry. The ratio of import and export trade of silk screen printing machines is less than 99.66:1 of the import and export value of sheet fed printing machines, and greater than 7.9:1 of the import and export value of web printing machines. The technical field and content involved in the silk screen printing brush machine can not be compared with the sheet fed printing machine and the web printing machine. The conditions for increasing exports are much better than these two kinds of equipment. In order to improve the extremely unbalanced import and export situation and the relatively backward development of technical silk printing machines, the development of silk printing equipment should follow the following directions

actively adopt industry standards

in 2004, the national development and Reform Commission issued 18 printing machinery equipment standards formulated and revised by the National Printing Machinery Standardization Technical Committee, including 3 standards involving silk printing equipment. Including lithographic printing press part I: platform lithographic printing press; Lithographic press part 2: cylinder type lithographic press; Silk printing frame. These standards clearly stipulate the parameters, installation accuracy, overprint quality and safety of the silk printing machine, so that the manufacturing of the silk printing machine has rules to follow, and has a beneficial impact on the improvement of product quality and technological progress. The starting point of formulating the silk printing frame standard is to reduce the material selection specifications between factories, reduce varieties, increase the one-time production batch of material manufacturers, and reduce social and manufacturing costs through the standardization of frame profiles

on the basis of absorbing foreign advanced experience, China's silk printing machine standard was completed through the hard work of drafting units and the participation of the majority of manufacturing enterprises. It should be recognized and actively adopted by most enterprises, so as to improve the manufacturing level of China's silk printing machines, especially the competitiveness of exports

expand the production scale of enterprises

the scale of silk printing equipment manufacturing enterprises is generally small, the real industry leading enterprises have not been formed so far, and the silk printing brush machine manufacturing enterprises with annual sales of more than 100 million yuan have not yet been formed. Although the price of a single silk printing machine is low, it is possible to actively expand varieties, expand market areas, improve the technical content of products, and form the prospect of large-scale production. In the manufacturing of other printing machinery and equipment, such as sheet fed printing machines, web printing machines, gravure printing machines, paper cutting machines, die-cutting machines, ink-jet printing machines, small offset printing machines of various specifications, enterprises with more than 100 million yuan or even more than one billion yuan have been born. Facts have proved that without large-scale production, it is difficult to make a big leap in technical level, quality, market and export services, and it is impossible to have a large capital investment in product development and technological transformation. Of course, the competitiveness of products will not have a big advantage

actively adopt advanced technology

from the technical level of the silk printing machine, most of the domestic equipment are medium and low-grade products, of which the manually operated equipment still accounts for a considerable share, which is extremely incompatible with the development level of the national printing machinery and equipment, let alone the realization of the current shaftless technology, single machine automation, on-line automation and the whole process digital solutions for prepress, printing and post printing

actively adopt Prepress digital technology

after nearly 10 years of development, digital direct plate making machine has been widely used in the printing industry and popularized to a variety of printing methods. Up to now, offset printing and flexographic printing have the application of digital direct plate making machine. The traditional plate making equipment is still used in the prepress plate making of the screen printing brush machine

information source: China paper

this article is from the Internet. The copyright belongs to the original author, and it is only for everyone to share and learn. If the author thinks that infringement is involved, please contact us. After we verify that this kind of metamaterial also shows a series of multi-functional properties, we delete it

Copyright © 2011 JIN SHI