Explain the installation method of anti-theft door

  • Detail

Explain the installation methods of anti-theft doors in detail editor: Ronggao intelligent doors and windows (1) the installation of anti-theft doors should adopt appropriate installation methods according to the type of anti-theft doors used

(2) the door frame of the anti-theft door can be fixed with the wall with expansion bolts, or iron parts can be embedded at the hole when building the wall, and welded firmly with the door frame connector during installation

(3) no matter what connection method is adopted between the door frame and the wall, there should be no less than 3 anchor points on each side, and they should be firmly connected

(4) when installing the anti-theft door, it should be straightened and hoisted first. After the size is appropriate, it should be temporarily fixed, corrected and adjusted, and then it can be connected and anchored

(5) the sliding door is required to be flexible after installation; The swing door can be opened easily and closed tightly and firmly

(6) anti theft devices shall be installed between the door frame and the door leaf or other parts

(7) hardware accessories such as handle, door lock and observation hole on the anti-theft door must be complete; The password protection lock, electronic alarm password system, doorbell paging and other devices on the multi-functional anti-theft door must be effectively improved

(8) it is required that the gap with the ground level should not be greater than 5mm

Ronggao stainless steel security door has both good function and exquisite appearance! If you are interested in or have questions about our products, you can call: 400-644-2788, and directly contact our customer service, Foshan Ronggao Intelligent Technology Co., Ltd. -- full service for you

source: http://www.rongao.net/





Copyright © 2011 JIN SHI